Wedges Prestressed Cable Anchor
Still deciding? Get samples first, Contact US !
View similar products
- Description
-
Key Attributes
Size: 12.70mm, 15.24mm,15.70mm , 17.80mm ,21.60mmRaw material grade is 40Cr, which is better than 45# .Heat treatment to control hardness, not extrusion.it can produced by your drawing or samples also , carve your brand letters .Specification
Wedges Prestressed Cable Anchor 1.Anchor ring
2.Anchor clamp
3.Steel wire loop
4.Anchor cable(steel strand)
（Item） （Specification） Barrel raw material 40Cr Wedge raw material 20CrMnTi; 20CrMn5 Hardness of anchor head (HRB) 25-35 Wedge surface hardness HRA79-84 Wedge core hardness HR38-46 Carburization Layer Depth 0.35-0.6mm; 0.6-0.8mm Anchor Efficiency Coefficient >0.95 With-draw of wedge after stressing <6mm Tempered 1-4 Retained Austenite 1-4 Inspection of Appearance Tooth shape without defect, bad teeth, or variant Standard GB/T2301-2004 Wholesale Wedges Prestressed Cable Anchor
Precise Material Selection
The barrel of this Wedges Prestressed Cable Anchor is made of high-quality 40Cr steel, which has a tensile strength of ≥980MPa and excellent hardenability, specifically designed for manufacturing components that bear high loads.
Its wedge is made of 20CrMnTi and 20CrMn5 steel. After carburization, the surface can achieve high hardness of HRA79-84, while the core remains with good toughness (HR38-46), achieving a good balance between wear resistance and impact resistance.
Scientific Hardness Gradient Design
The anchor head of this Wedges Prestressed Cable Anchor manufactured by Tianlong Fastener has a hardness of 25-35 HRB, featuring good toughness to disperse stress.
The wedge has a surface hardness of HRA79-84, which significantly enhances wear resistance and prevents slippage;the core hardness is HR38-46, forming a gradient structure of "hard surface and tough core". This not only ensures the surface wear resistance but also avoids overall brittle fracture.
High Anchoring Efficiency
The anchoring efficiency coefficient of this Wedges Prestressed Cable Anchor is ＞0.95, far exceeding the general industry requirement (≥0.9), making the anchoring effect more reliable.
The wedge has a small withdrawal amount after tensioning, ensuring stable locking force between the wedge and the anchor rod, which is not easy to loosen during long-term use.
Wedges Prestressed Cable Anchor ：Precise Carburizing Process
It offers two carburization layer depths: 0.35-0.6mm and 0.6-0.8mm. The tempered sorbite (Tempered) and retained austenite (Retained Austenite) are controlled within 1-4%, ensuring the product maintains stable performance during long-term use.
Company Video
Certificate
Factory photo
Exhibition Collection
Package
FAQ
Wedges Prestressed Cable Anchor
Still deciding? Get samples first, Contact US !
Products Category
Inquire Now
Note: Please leave your email address, our professionals will contact you as soon as possible!
Hebei Tianlong Fastener Co., Ltd
Contact: Sophia
Tel: +86 18630088852
Tel: +86 15132010868
E-mail: [email protected]
E-mail: [email protected]
Add: Tianlong Company, Yongnian District, Handan, Hebei, China
Request Quote